OmniRoute/docs/guides/REMOTE-MODE.md

title, version, lastUpdated

title	version	lastUpdated
Remote Mode — Drive a remote OmniRoute from your laptop	3.8.40	2026-06-28

Remote Mode

Run the omniroute CLI on your laptop while OmniRoute itself runs somewhere else (a VPS, a home server, another machine on your Tailnet). You log in once with omniroute connect, and from then on every CLI command targets that remote server — same commands, same output, just executed against the remote.

There is no second tool to install: remote mode is the regular omniroute CLI plus scoped access tokens.

npm install -g omniroute                 # the normal CLI
omniroute connect 192.168.0.15           # log in (password → scoped token)
omniroute models list                    # ← now lists the REMOTE server's models
omniroute configure codex                # ← writes a local Codex profile from the remote catalog

---

How it works

your laptop                              remote OmniRoute (VPS)
┌────────────────────┐                   ┌───────────────────────────────┐
│ omniroute CLI      │  POST /api/cli/connect  (password → token)         │
│  context: vps      │ ───────────────►  │ mints a scoped access token    │
│  baseUrl, token    │  Authorization: Bearer oma_live_…                  │
│                    │ ───────────────►  │ every management route, scope- │
│ writes configs     │ ◄───────────────  │ checked per the token's scope  │
│ LOCALLY            │                   └───────────────────────────────┘
└────────────────────┘

• Contexts store one server each (~/.omniroute/config.json, chmod 600). omniroute contexts use <name> switches the active server; default is local.
• Access tokens (oma_live_…) authorize management commands. They are distinct from inference API keys (sk-…, used for /v1/chat/completions).
• Only the SHA-256 hash of a token is stored server-side. The plaintext is shown once, at creation.

---

Connecting

With the management password (bootstrap)

omniroute connect 192.168.0.15
# Management password for http://192.168.0.15:20128: ********
# ✔ Connected to http://192.168.0.15:20128 — context '192.168.0.15' (scope: admin)

The password flow mints an admin token by default (you hold the password, so you already have full control). Downscope with --scope:

omniroute connect 192.168.0.15 --scope write

Options: --port <p> (when the host has none), --name <ctx> (context name), --scope read|write|admin. A full URL is honoured as-is: omniroute connect https://omni.example.com.

With a pre-generated token

Generate a scoped token in the dashboard (or with omniroute tokens create) and paste it — no password needed:

omniroute connect 192.168.0.15 --key oma_live_xxxxxxxx

The CLI validates it via GET /api/cli/whoami and saves it as the active context.

---

Scopes

Three levels, hierarchical (admin ⊃ write ⊃ read):

Scope	Can do
read	list/inspect — models list, providers status, logs, usage, cost
write	read + configure/apply — setup-codex, keys add, config set, combos
admin	write + manage — tokens CRUD, add providers, services, policy, oauth

The server infers the scope each route requires from the HTTP method (GET→read, mutations→write) plus an admin allowlist for sensitive surfaces (/api/cli/tokens, /api/providers mutations, /api/oauth, /api/services, …). A token with insufficient scope gets 403 with a clear message.

Routes that spawn processes (/api/services/*, /api/mcp/*, …) stay loopback-only — a remote token can never reach them, regardless of scope.

---

Connecting Antigravity on a remote install

Antigravity uses Google's firstparty/nativeapp consent screen. Google only releases the authorization code when the loopback redirect (http://127.0.0.1:<port>/callback) is reachable from the browser that approves the sign-in. On a remote VPS install that loopback lives on the server, not on your machine, so the consent screen hangs forever and never emits a code — the normal "paste the callback URL" fallback has nothing to paste. (This is a Google-side constraint: the same hang happens in any proxy that uses the bundled Antigravity desktop client, not just OmniRoute.)

The dashboard detects this before you get stuck: opening Providers → Antigravity → Connect from a non-localhost address replaces the generic "copy the callback URL" notice with the two remedies below, each with your host and port already filled in. (A LAN address counts — 192.168.x.x is not localhost as far as this callback is concerned.)

There are two supported ways to connect Antigravity to a remote OmniRoute.

Option A — local login helper (recommended)

Run the OAuth on your own computer, where 127.0.0.1 is reachable, and paste the result into the remote dashboard. The helper talks only to Google — it does not need network access to your VPS, so it works even behind firewalls.

# On your LOCAL machine (needs Node.js + a browser):
npx omniroute login antigravity
#   ↳ opens the Google consent in your browser, captures the callback on a local
#     loopback port, exchanges it, and prints a one-line credential blob:
#
#   omniroute-cred-v1.eyJ2IjoxLCJ...

Then, in the remote dashboard: Providers → Antigravity → Connect, and paste the omniroute-cred-v1.… blob into the Step 2 field (it accepts either a callback URL or a credential blob). OmniRoute decodes it, runs the Cloud Code onboarding server-side, and persists the connection.

The blob contains a refresh token — treat it like a password. It is sent once over your dashboard connection and stored encrypted at rest.

Flags: --no-browser (print the URL instead of auto-opening), --port <n> (pin the loopback port), --timeout <ms>.

Option B — SSH local-forward tunnel

If you have SSH access to the VPS, forward the dashboard port so that the loopback callback resolves back to the server through the tunnel:

# On your LOCAL machine:
ssh -L 20128:127.0.0.1:20128 user@your-vps
# then open http://localhost:20128 in your LOCAL browser and connect Antigravity
# normally — the 127.0.0.1:20128/callback redirect now reaches the VPS via SSH.

Because you reach the dashboard as localhost:20128, the Google consent completes and the callback is delivered to the server through the same tunnel — no blob needed. Keep the tunnel open until the connection shows as active.

Unlike the fixed-loopback providers below, one forward is enough here: the Antigravity callback rides the dashboard port itself, so there is no second provider-specific port to tunnel.

A fully headless alternative (no helper, no tunnel) is to configure your own Google OAuth web credentials + a public base URL; see the provider's OAuth environment variables. The two options above need no extra Google setup.

---

Connecting Codex / Grok on a remote install (fixed-loopback providers)

Codex, xAI (xai-oauth) and Grok CLI (grok-cli) register a fixed loopback redirect_uri with their upstream OAuth app. OmniRoute cannot change it — the provider always sends the browser back to the same hardcoded address:

Provider	Fixed callback the provider redirects to
codex	http://localhost:1455/auth/callback
xai-oauth	http://127.0.0.1:56121/callback
grok-cli	http://127.0.0.1:56122/callback

localhost there means the machine running the browser, while OmniRoute's PKCE callback server listens on the server's loopback. Open the dashboard at a LAN address like http://192.168.0.15:20128 and the two never meet: the authorization code is delivered to your own laptop's localhost:1455, where nothing is listening, and the provider fails the sign-in without surfacing an error.

The dashboard detects this before opening the popup and shows the tunnel command instead of letting the login fail silently (#8046).

Fix — forward both ports

# On the machine running the BROWSER:
ssh -L 20128:127.0.0.1:20128 -L 1455:127.0.0.1:1455 <user>@192.168.0.15
# then browse to http://localhost:20128 and connect Codex from there

Two forwards are required, and forwarding only one still fails:

• 20128 (the dashboard port) makes the origin true-localhost, which is what makes OmniRoute start the PKCE callback server at all — a LAN origin never reaches that branch.
• 1455 (the provider's fixed callback port) is where the browser is sent back to; it has to tunnel through to the server's loopback.

Swap 1455 for 56121/56122 when connecting xAI or Grok CLI, and 20128 for your actual dashboard port. Keep the tunnel open until the connection shows as active.

No SSH access? Codex and Grok CLI also accept a pasted token — the Paste API Key / Import auth.json tab on the connect dialog. That path has no loopback callback, so it works from any origin. Codex additionally accepts a bare access token or a ~/.codex/auth.json session blob.

---

Managing tokens

omniroute tokens create --name "laptop" --scope write [--expires 30]
#   ↳ prints the secret ONCE — copy it now
omniroute tokens list                 # masked: id, name, scope, prefix, status, expiry
omniroute tokens revoke <id|prefix>   # revoke immediately
omniroute tokens scopes               # explain the three scopes

tokens commands require an admin credential. You can also manage tokens in the dashboard under Settings → Access Tokens (create, revoke, copy-once).

---

Configuring a coding CLI from the remote catalog

omniroute configure reads the active server's live model catalog and writes a config on your machine.

omniroute configure codex
#   Providers: glm, kmc, ollamacloud, opencode-go, …
#   Provider: glm
#   Model id: glm/glm-5.2
#   ✔ Wrote ~/.codex/glm52.config.toml
#   Use it:  codex --profile glm52

# non-interactive
omniroute configure codex --provider glm --model glm/glm-5.2 --name glm52

The written profile references the inference key by env var (OMNIROUTE_API_KEY) — the secret is never written to disk. For the one-time base Codex setup (the [model_providers.omniroute] block), see CODEX-CLI-CONFIGURATION.md.

Per-CLI setup commands

Each supported CLI has a remote-aware setup command (all honour the active context, or --remote <url> --api-key <key>):

CLI	Command	What it writes
Codex	omniroute setup-codex	~/.codex/<name>.config.toml profiles (per model)
Claude Code	omniroute setup-claude	~/.claude/profiles/<name>/settings.json (per model)
OpenCode	omniroute setup-opencode	~/.config/opencode/opencode.json — the omniroute openai-compatible provider with every catalog model (run opencode -m omniroute/<model>)
Cline	omniroute setup-cline	~/.cline/data/{globalState,secrets}.json (CLI mode) + prints the VS Code extension settings to paste (OpenAI-compatible, Base URL without /v1)
Kilo Code	omniroute setup-kilo	~/.local/share/kilo/auth.json (CLI) + VS Code kilocode.* settings — OpenAI-compatible, Base URL with /v1
Continue	omniroute setup-continue	~/.continue/config.yaml (VS Code/JetBrains + cn CLI) — provider: openai, apiBase with /v1, key via ${{ secrets.OMNIROUTE_API_KEY }}
Cursor	omniroute setup-cursor	prints the in-app steps (Settings → Models → Override OpenAI Base URL with /v1 + key + model). Cursor config is opaque SQLite — chat panel only
Roo Code	omniroute setup-roo	writes a Roo import JSON (~/.omniroute/roo-settings.json) + sets roo-cline.autoImportSettingsPath + prints UI steps (OpenAI-compatible, Base URL with /v1)
Crush	omniroute setup-crush	~/.config/crush/crush.json — openai-compat provider, base_url with /v1, key via $OMNIROUTE_API_KEY
Goose	omniroute setup-goose	~/.config/goose/config.yaml (GOOSE_PROVIDER=openai + OPENAI_HOST without /v1 + GOOSE_MODEL) + env recipe
Aider	omniroute setup-aider	~/.aider.conf.yml (openai-api-base without /v1 + model: openai/<id>) + env recipe (aider --message --yes)
Qwen Code	omniroute setup-qwen	~/.qwen/settings.json V4 modelProviders.openai entry + OMNIROUTE_API_KEY in ~/.qwen/.env

# OpenCode (openai-compatible provider, all catalog models, remote VPS)
omniroute setup-opencode --remote http://192.168.0.15:20128 --api-key oma_live_xxx
omniroute setup-opencode --only glm,kimi        # keep only matching models
opencode -m omniroute/glm/glm-5.2 "..."          # export OMNIROUTE_API_KEY first

OpenCode also has a richer plugin integration: omniroute setup opencode (now remote-aware via --remote) installs @omniroute/opencode-plugin. setup-opencode is the lightweight openai-compatible alternative. The API key is referenced via {env:OMNIROUTE_API_KEY} — never written to disk.

---

Managing contexts (switch between servers)

A context is a saved server (baseUrl + credential + scope). omniroute connect creates one and makes it active; from then on every command targets it. Manage and switch between them with omniroute contexts:

omniroute contexts list            # all contexts; the active one is marked ●
omniroute contexts current         # the active server, auth status, scope

  | Name    | Base URL                  | Auth  | Scope | Description
● | vps     | http://100.67.86.91:20128 | token | admin | Remote OmniRoute (…)
  | default | http://localhost:20128    | ✗     |       |

Switch servers — every subsequent command follows the active context:

omniroute contexts use vps         # → all commands now hit the remote VPS
omniroute tokens list              #   (runs against the VPS)

omniroute contexts use default     # → back to localhost
omniroute tokens list              #   (runs against the local server)

Add a context manually (instead of connect), inspect, or rename:

omniroute contexts add staging --url https://staging.example.com:20128 \
  --access-token oma_live_xxxx --scope write --description "staging box"
omniroute contexts show staging    # full details for one context
omniroute contexts rename staging stg

Remove a context — prompts for confirmation; pass --yes to skip it (required for scripts / non-interactive shells, which otherwise decline safely):

omniroute contexts remove stg --yes

default (localhost) cannot be removed. Removing the active context falls back to default. Tip: removing a context only drops the local saved credential — revoke the token on the server with omniroute tokens revoke <id> to actually kill access.

Export / import contexts (e.g. to move them between machines — secrets included, so handle the file carefully):

omniroute contexts export --out contexts.json     # default: stdout
omniroute contexts import contexts.json            # overwrite; --merge to keep existing

---

Quick end-to-end check

A copy-paste lifecycle to verify a remote setup from scratch — connect, mint a scoped token, route a command, switch back, and tear down. Replace 192.168.0.15 with your server's host/IP (Tailscale, LAN, or a public https://… URL).

# 1. Connect (password → admin token, saved as a context that becomes active)
omniroute connect 192.168.0.15                 # or: --key oma_live_xxxx  (no password)
omniroute contexts current                     # shows the remote server + scope

# 2. Use it — management commands now run against the remote
omniroute tokens create --name laptop --scope read   # mint a narrower token
omniroute tokens list                                 # masked list, from the remote

# 3. Switch back and forth
omniroute contexts use default                 # → local
omniroute contexts use 192-168-0-15            # → remote again (name from `contexts list`)

# 4. Tear down. NOTE: `contexts remove` only deletes the LOCAL credential —
#    it does NOT revoke the token on the server. Revoke server-side first if you
#    want to actually kill access.
omniroute tokens revoke <id|prefix>            # kills access on the server
omniroute contexts remove 192-168-0-15 --yes   # drop the local context (even if active → falls back to default), no prompt

--yes makes contexts remove non-interactive (required in scripts/CI; without it, a non-interactive shell declines safely instead of hanging). Removing the active context falls back to default automatically.

---

Security notes

• Token plaintext is shown once; only the SHA-256 hash is persisted (same as API keys).
• omniroute connect reuses the login brute-force lockout + audit logging.
• Prefer HTTPS or a Tailnet for the transport; a bare host defaults to http:// for LAN/Tailscale convenience — pass a full https://… URL for TLS.
• The local context file is ~/.omniroute/config.json (chmod 600); tokens are never printed in logs (masked to a prefix).

---

API endpoints (reference)

Method	Route	Auth	Scope
POST	/api/cli/connect	management password	— (public, password-gated)
GET	/api/cli/whoami	access token	read
GET	/api/cli/tokens	access token	admin
POST	/api/cli/tokens	access token	admin
DELETE	/api/cli/tokens/:id	access token	admin

See openapi.yaml for full schemas.