mirror of
https://github.com/MHSanaei/3x-ui.git
synced 2026-10-27 00:04:59 +03:00
952c1c751a2bbc7fc837c8fb0a857afd93cebc31
3 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 YoungReckless4
|
56ac8d0fc7 |
feat(amneziawg): add opt-in Linux kernel datapath (#6877)
* feat(amneziawg): add opt-in Linux kernel datapath Add the kernel backend as an explicit per-inbound option while keeping the embedded backend as the default. Include host preflight, UI/API support, the bundled installer CLI, lifecycle and accounting integration, regression tests, and upstream-facing documentation. Kernel mode is NAT-only and rejects unsupported routing, IPv6, forwarding, and pinned-listen configurations. Local saves check the local host; remote nodes check their own host during apply. Preserve adopted interface accounting across panel restarts, retain manager state after failed teardown so the job can retry, prevent embedded startup while a kernel interface remains live, and prune collector state for removed peers. Tested the restart accounting path on Debian 13 with XanMod 7.1.11 on x86_64; Docker and cross-kernel coverage are not claimed. * fix(amneziawg): align readiness and endpoint reporting Expire endpoint sightings using the latest handshake and sweep stale addresses for the polled interface. Keep the readiness API schema, generated client types, and ready-host empty blocker list consistent; watch the nested form field and defer local readiness checks for remote targets. Document safe rollback before using a build without kernel support. Regression evidence: the idle endpoint test failed before the collector change because the old address remained visible after 31 minutes; endpoint tests pass after the fix. The form component suite passes 3 tests; restoring the invalid array watch made its off-mode severity test fail, while the corrected dot-path watch passes. Targeted Go regressions across amneziawgkern, job, and service pass. * style(amneziawg): format readiness test * test: reproduce kernel AWG client validation gaps * test(service): cover kernel AWG shared client fanout * fix(amneziawg): validate kernel client fanout and config values * test(amneziawgkern): cover owned interface lifecycle recovery * fix(amneziawgkern): recover owned interfaces on restart * test(amneziawgkern): retain visibility after recovered cleanup failure * fix(amneziawgkern): report recovered interfaces while cleanup retries * style(amneziawgkern): satisfy static analysis * test(amneziawgkern): cover long rendered peer comments * fix(amneziawgkern): accept long generated config comments * test(amneziawgkern): refuse foreign occupied interfaces Capture the current Ensure ordering failure with real temporary config paths and manager side-effect boundaries. * test(amneziawgkern): cover stale interface collisions Extend the Ensure regression across absent links, mismatched live interfaces, cached manager state, and Remove teardown. * fix(amneziawgkern): verify interface ownership before mutation Refuse to replace or tear down links unless the canonical config is a valid panel-owned file and its key matches the live interface. Preserve normal adoption and key rotation, and document migration of legacy unmarked configs. Validation: go test ./internal/amneziawgkern -count=1; go test -race ./internal/amneziawgkern -count=1; golangci-lint run ./internal/amneziawgkern/...; git diff --check. * build: update Go toolchain to 1.27.3 * test(amneziawg): reproduce unsafe key rotation recovery Keep the previous owned config authoritative until teardown succeeds, and require fresh managers to rebuild structural key changes. These regressions expose the stuck live-key/disk-key mismatch after teardown failure. * fix(amneziawg): recover interrupted key rotations Keep the old owned config on disk until a structural rebuild has confirmed the previous interface is down. Fresh managers only adopt when the live config and desired structural identity match, so retries and removals retain the key needed to prove ownership. * fix(scanner): align Go image with module version * fix(docs): pin pnpm release with bootstrap fix pnpm 12.9.1 restores a Node launcher before its postinstall replaces the target with ELF; pnpm 11 then runs that binary as JavaScript. Pin 12.10.0, which includes the shim fix, so the docs CI bootstrap can switch versions safely. * fix(xray): build core from pinned module The configured Xray release asset tag is unpublished, and the latest published binary lacks GetUsersStats used by the panel. Build the packaged core from the exact Xray module version already selected in go.mod for Docker and release targets. * fix(tests): stabilize local network fixtures Keep the TUIC stream fragmentation check on a working UDP loopback path, allocate the AmneziaWG fixture ports dynamically, and wait for a real Xray stats response before starting API mutation assertions. Recreate failed readiness channels so an early connection cannot stall the probe. Verified host and offline parallel Go suites, repeated occupied-port and UDP tests, race/shuffle runs, and golangci-lint. Production behavior and dependency versions are unchanged. * fix(i18n): add the kernel-mode AmneziaWG keys to sk-SK main gained the sk-SK locale after this branch added its kernel-mode keys to the other 13, so i18n-dead-keys.test.ts failed on the merged tree. * refactor(amneziawgkern): apply kernel interfaces with direct commands, no awg-quick awg-quick evaluates PostUp/PostDown through a root shell, so every value the panel rendered into its config was one validation slip away from root command execution. The interface is now built with direct ip/awg/nft execs from a setconf-only file: link add, awg setconf, address, mtu, an atomically replaced nftables table per inbound, and the IPv4 forwarding sysctl written directly. - Panel-owned names and paths: xui-awg<id> interfaces, xui_awg<id> NAT tables and configs under the panel's data dir, so nothing collides with an operator's own awg0/awg1 awg-quick tunnels in /etc/amnezia/amneziawg. - FORWARD accepts (comment 3x-ui:xui-awg<id>) when iptables is present: Docker and ufw set the FORWARD policy to DROP, which silently black-holed the tunnel. - A full panel stop records the final counters and tears the interfaces down, like the embedded datapath; a stopped panel enforces no quota or expiry. Crash survivors are still adopted without a rebuild. - The job reads counters before reconciling, and from every managed interface, so a client disabled for quota, or a removed inbound, is charged for its last interval instead of losing it with the dropped peer. - An unchanged reconcile tick forks no process (it probed the live key with `awg show` every 10s); readiness no longer loads the module from a GET. Verified on the real module (WSL2 6.6 kernel, v3.1.20260906): create, peer and egress changes in place, SIGKILL adoption with the same ifindex, SIGTERM teardown leaving no link, table, FORWARD rule or config behind. * fix(amneziawg): gate kernel host readiness only when a save starts the datapath Every save of a kernel-mode inbound re-ran the host preflight, so a host that lost its module (a kernel upgrade without a DKMS rebuild) refused even disabling the inbound or switching it back to embedded mode. Host blockers now apply only when the save starts the kernel datapath: a new inbound, a switch from embedded, or enabling a disabled one. Feature blockers (IPv6, forwarded ports, pinned listen) still apply to every save. * feat(nodes): refuse kernel-mode AmneziaWG pushes to nodes that predate it A node built before kernel mode drops the unknown kernelMode field and serves the inbound on the embedded datapath while the master's form shows kernel mode on. Nodes now advertise awg-kernel in X-3x-Node-Caps, and Remote refuses to push a kernel-mode inbound to a node that has not advertised it, learning the caps with an inbound list first when this Remote has not heard from it. * fix(amneziawg): pin the kernel module installer to verified commits The installer ran as root and built whatever upstream tag sorted newest at install time. It now clones fixed tags (module v3.1.20260906, tools v3.1.20260812) and refuses unless each resolves to its recorded commit. The udp_tunnel perl patch is gone: those releases carry the kernel 7.1.5 compat upstream, so the patch never matched. * fix(i18n): translate the kernel-mode AmneziaWG strings All thirteen non-English locales carried the English text verbatim. * fix(amneziawg): skip the kernel traffic flush when no kernel interface runs Shutdown listed the desired AmneziaWG inbounds from the database even on a panel with no kernel interface, an unneeded query on every stop. A server stopped before its database was opened panicked on it, which turned TestServerStopWhenXrayNotRunningSucceeds red whenever it ran first. --------- Co-authored-by: MHSanaei <ho3ein.sanaei@gmail.com> |
||
 mrchatam
|
7a41c59494 |
fix(amneziawg): honor inbound listen when binding UDP socket (#6461)
* fix(amneziawg): honor inbound listen when binding UDP socket AmneziaWG inbounds ignored the listen field and always opened awgconn.NewDefaultBind(), so multi-IP hosts replied from the primary address and handshakes to a secondary IP never completed (#6367). Carry Inbound.Listen on amneziawg.Instance, open a Bind pinned to that address (wildcard when empty/0.0.0.0/::), and include listen in addressFingerprint so edits rebuild the Device. Fixes #6367 * fix(amneziawg): fall back to wildcard when listen is unusable Invalid or non-local listen values no longer hard-fail inbound startup; treat ::0/[::0] as wildcards and normalize listen in the bind fingerprint. * fix(amneziawg): use ListenConfig.ListenPacket for noctx --------- Co-authored-by: mrchatam <mrchatam@users.noreply.github.com> Co-authored-by: mrchatam <287639636+mrchatam@users.noreply.github.com> |
||
 Kuzz007
|
effcccceac |
feat(amneziawg): add native AmneziaWG protocol support (#6105)
* feat(amneziawg): add native AmneziaWG protocol backend AmneziaWG (WireGuard plus DPI-resistant obfuscation) needs no Docker here — it runs as a genuine kernel interface via awg-quick/awg, managed the same way internal/mtproto manages mtg: one Inbound row is one desired Instance, and a Manager reconciles running interfaces toward the database every 10s (internal/web/job/amneziawg_job.go) plus immediately after a client edit (applyLocalAmneziaWG). Clients reuse model.Client verbatim (the same PrivateKey/PublicKey/ PreSharedKey/AllowedIPs fields WireGuard already uses), so bulk operations, the QR/share-link modal and subscriptions come from the shared inbound infrastructure instead of a parallel implementation. internal/amneziawg owns the obfuscation param generator/validator (ported from coinman-dev/3ax-ui, upgraded to AmneziaWG 2.0's S3/S4 padding and I1 signature packet) and the exec wrapper around awg-quick/awg, with fingerprint-based reconcile (noop / reload-via- syncconf / full restart) mirroring mtproto.Manager so a same-protocol edit doesn't force an unnecessary interface bounce that would drop every peer's connection. Frontend and install.sh's DKMS/awg-tools setup are tracked separately; this is backend-only. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): add frontend support and fix a Go->Zod generator gap Wires the amneziawg protocol through the panel UI the same way every other protocol is registered: a Zod settings schema (nested {server, clients}, matching the Go JSON exactly), the protocol enum, the inbound-form's per-protocol fields component and its tab-visibility allowlist, the default-settings factory, the client schema dispatcher, and the sniffing-capability exclusion (no Xray inbound exists for amneziawg, same as mtproto). Client key/allowedIPs fields are reused rather than duplicated: since AmneziaWG clients are wire-identical to WireGuard clients (same model.Client fields), ClientFormModal renders one shared field block for both, switching only the visible label by which protocol is active. The private-key input also gets a live public-key sync via a new useEffect, because unlike WireGuard's Xray-native inbound (which re-derives its public key at runtime and never stores one), AmneziaWG's server.publicKey is a real persisted field the Go backend reads directly — free-typing a new private key without this would silently save a mismatched keypair. Adds a downloadable per-client .conf (amneziawgConfig.ts, mirroring wireguardConfig.ts) with the obfuscation lines, and an InboundOption.AwgServer field on the Go side so the config builder gets the full server block in one round trip. Along the way, running tools/openapigen surfaced a real bug: it doesn't flatten anonymously-embedded Go structs the way encoding/json does, so ServerSettings embedding Obfuscation20 produced a Zod schema with a nested `obfuscation20` key that never matches the real wire JSON. Fixed by un-embedding (flat fields + an accessor method) and registering internal/amneziawg in the generator's own package list, which had been silently emitting a dangling schema reference. English and Russian translations are complete; the other 10 locale files still fall back to English for the new keys. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): complete frontend parity for the Inbounds list page The Clients page (form, CRUD, QR/config) already worked from the prior commit; this closes the remaining gap on the Inbounds side and in a couple of protocol allowlists that a plain search for existing wireguard/mtproto handling turned up. lib/xray/inbound-link.ts gets amneziawg-specific link/config builders (genAmneziaWGLink/genAmneziaWGConfig, plus the *s fan-out variants) mirroring the wireguard ones — AmneziaWG has no legacy peers-array to fall back to, so these read settings.clients directly and add the obfuscation lines every client must share with the server. Wired into genInboundLinks generically, and into three consumers that call the wireguard builders directly rather than through that dispatcher: QrCodeModal, InboundInfoModal, and InboundsPage's bulk export. ClientInfoModal, ClientBulkAddModal, and the bulk attach/detach modals each had their own protocol allowlist that needed amneziawg added alongside wireguard/mtproto. Two real gaps surfaced by grepping every remaining 'wireguard' / Protocols.WIREGUARD hit in frontend/src rather than trusting the checklist was exhaustive: - useInbounds.ts's TRACKED_PROTOCOLS gates the deactive/depleted/ expiring/online client counts shown per inbound on the list page; without amneziawg those counts would silently read zero. - inbound-tag.ts is an explicit client-side mirror of the Go backend's port_conflict.go (the file says so itself: "Keep in sync"). It still only special-cased wireguard for UDP, so an amneziawg inbound would have fallen through to the TCP default and disagreed with the backend's own port-conflict math. Also finishes translating the AmneziaWG UI strings into the 11 locale files that were still falling back to English (ar-EG, es-ES, fa-IR, id-ID, ja-JP, pt-BR, tr-TR, uk-UA, vi-VN, zh-CN, zh-TW), matching en-US/ru-RU key-for-key (26 new keys, verified by count in every file). Not run anywhere: npm run typecheck / build. This machine has neither Node nor npm, so nothing here has compiled — reviewed by hand plus brace/paren balance checks and cross-referencing the generated Zod/TS types. Treat this as needing a real typecheck before shipping. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * docs(install): note that AmneziaWG kernel module install is still manual Tracked separately (not yet ported into this script) — see coinman-dev/3ax-ui's install_amneziawg for the reference approach (ppa:amnezia/ppa). Also serves as a real, path-filter-matching change to get the previous empty commit's CI trigger to actually fire — release.yml's push trigger is paths-scoped and an empty commit changes no files, so it never matched. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): add a button to randomize obfuscation parameters Mirrors the existing key-regenerate button next to the private key field. Client-side randomization matches the ranges/constraints of GenerateObfuscation20's "default" preset (internal/amneziawg/params.go) closely enough for a form suggestion — the user can still hand-edit any field afterward. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(install): auto-install the AmneziaWG DKMS module + amneziawg-tools Ports install_amneziawg from coinman-dev/3ax-ui's install.sh, adapted to this script's broader distro coverage and NONINTERACTIVE convention: - Ubuntu/Debian/Armbian: ppa:amnezia/ppa (primary, tested path), with a reachability pre-check for the Launchpad PPA host — often blocked by hosting providers, especially Russian VPS — so a flaky network skips the feature instead of hanging apt through several retries. - Fedora/RHEL-family, Arch/Manjaro/Parch: best-effort fallback to plain wireguard-tools (+ AUR amneziawg-dkms via yay/paru when available), with a manual-install pointer. - Everything else: manual-install pointer only. Also installs ndppd and persists IPv4/IPv6 forwarding (for the future IPv6/NDP phase, not yet wired into the panel) and adds a Secure Boot warning at the end of the run, since a DKMS-built module is unsigned and won't load while it's enabled — a common trap on cloud VPS images. Never fatal: the panel installs and runs fine either way, an AmneziaWG inbound just won't bring up its tunnel until the module is present. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): resolve all 3 real CI failures (typecheck/lint/codegen) Found by checking the fork's Actions tab after the last two pushes — the release build passed (it doesn't run these checks) but the separate CI workflow caught three real issues: - golangci-lint (noctx): every internal/amneziawg/manager.go exec.Command call is now exec.CommandContext with a 30s timeout, so a hung awg-quick/awg invocation can't block the reconcile job indefinitely (mirrors internal/mtproto/process.go's own CommandContext usage). - tsc --noEmit: frontend/src/schemas/client.ts's hand-maintained InboundOptionSchema (used by the useClients hook, separate from the auto-generated one in generated/) never got an awgServer field added when the AmneziaWG frontend work was done — every read of inbound.awgServer.* in amneziawgConfig.ts was typing as {}. Added AwgServerOptionSchema, nested (not flattened like wg*) to match what amneziawgConfig.ts already expects. Also guarded server.publicKey in inbound-link.ts's genAmneziaWGLink against the schema's optional type. - codegen staleness: frontend/public/openapi.json is produced by a Node script (gen:api) this machine can't run; hand-applied the exact diff the CI failure log already showed (amneziawg protocol enum entry, ServerSettings schema, InboundOption.awgServer, one example payload), verified as valid JSON. Also confirmed independently by this run: install_amneziawg (previous commit) installed and loaded the DKMS module successfully on both amd64 and arm64 CI runners. The two "Deploy Smoke Tests" failures are unrelated to this change — this fork has only ever published the dev-latest pre-release, and GitHub's /releases/latest API deliberately excludes pre-releases, so the smoke test's no-argument install path (which resolves "latest") has nothing to find. Not a regression; needs an actual tagged release whenever that's wanted. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): Phase 2a — IPv6 support + NDP proxy Adds native dual-stack IPv6 to AmneziaWG inbounds, ported from coinman-dev/3ax-ui's approach: - ServerSettings gets ipv6Enabled/ipv6Subnet/ipv6ExternalInterface; Instance carries the server's own IPv6 address (first host of the subnet) alongside its IPv4 one. - defaultAmneziaWGClients allocates an IPv6 host address per client (second AllowedIPs entry) when the server has IPv6 enabled, reusing allocateWireguardAddress — which needed a real fix along the way: it always suffixed "/32" regardless of address family, which is wrong for an IPv6 host address (needs /128). Now family-aware. - generateServerConfig's PostUp/PostDown gains IPv6 forward-accept rules, proxy_ndp sysctl, and one `ip -6 neigh add/del proxy` entry per enabled peer with an IPv6 address — the lightweight per-client method, not the ndppd-daemon whole-subnet method (not worth the config-file-management complexity at this scale; ndppd itself is still installed by install.sh in case that changes later). - ValidateIPv6Subnet rejects a malformed subnet before save. - Frontend: ipv6Enabled/ipv6Subnet/ipv6ExternalInterface fields on the AmneziaWG inbound form, EN+RU translations, openapi.json/generated/* regenerated (the latter via `go run ./tools/openapigen`, pure Go). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): fill in IPv6 fields missed by the Phase 2a commit Two real gaps the CI caught (both new fields, both my miss): - inbound-defaults.ts's createDefaultAmneziawgInboundSettings() built a server object literal predating ipv6Enabled/ipv6Subnet/ ipv6ExternalInterface — AmneziawgServer's inferred type now requires them (zod .default() fields are non-optional post-parse), so this didn't typecheck at all. - openapi.json's ipv6Enabled property was missing the description the real generator attaches (the Go doc comment covering all three IPv6 fields is attached to the first one) — a one-line diff, but git diff --exit-code doesn't care how small. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): Phase 2b — per-client port-forwarding Admins can now set a per-client ForwardedPorts string (e.g. "80, 443, 8000-8100") that gets DNAT'd + FORWARD'd to that peer's tunnel address via iptables rules in PostUp/PostDown, ported and simplified from coinman-dev/3ax-ui's shared/portfwd. Two decisions worth flagging for future readers: - The iptables --comment tag on each rule is awg-fwd-<fnv32a(email)>, not the raw client email. Email is admin/API-supplied free text that ends up embedded in a shell-executed PostUp/PostDown line; a hash can never carry a shell metacharacter through where raw interpolation could. - The reconcile manager gained a third fingerprint (portFwdFP, next to the existing structural/peers ones). `awg syncconf` only touches the WireGuard peer table — it never re-applies PostUp/PostDown iptables rules — so a port-forward-only change has to force a full awg-quick down+up bounce, same as a structural change, rather than the lighter sync a plain peer add/remove can use. Also fixes a real pre-existing bug found while wiring up IPv6 client allocation in the previous commit's spirit: allocateWireguardAddress always suffixed "/32" regardless of address family, which produced invalid host bits for IPv6 (needs "/128"). ForwardedPorts flows through model.Client -> model.ClientRecord (gorm column wg_forwarded_ports, auto-migrated) -> ToRecord/ToClient/ MergeClientRecord, mirroring the awgServer field's earlier lesson that new fields need checking against a second, hand-maintained persistence-layer struct. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): route a client's traffic through Xray via the Routing page Every enabled AmneziaWG inbound gets its own Xray TPROXY bridge automatically, with no toggle to enable first: a loopback dokodemo-door inbound (sockopt.tproxy) tagged with the AmneziaWG inbound's own real tag, so it's already selectable in the existing Routing page's inbound-tag picker — the same trick the mtproto sidecar's own bridge already relies on (InboundService.GetInboundTags is a plain, protocol-blind SELECT over every inbound row's tag, no dedicated UI plumbing needed). internal/amneziawg's defaultPostUpDown TPROXYs every peer's traffic into that bridge unconditionally; the bridge's port is derived deterministically from the inbound's id (EgressPortForInbound) so the kernel-side reconcile loop and the Xray-config generator never need to negotiate a runtime value between them. injectAmneziawgEgress never generates a routing rule itself — whether a client's traffic goes anywhere beyond Xray's default routing is entirely up to whatever rules the admin adds through the existing Routing UI (pick the AmneziaWG inbound's tag as source, optionally a specific peer's IP via that page's own Source-IP field, and an outbound), exactly the same workflow as routing any other protocol. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): recover orphaned interfaces after an ungraceful exit Two gaps left an AmneziaWG interface stuck outside the manager's control after a crash (kill -9/OOM/panic skips StopAll): - ensureRestart's teardown was gated on the in-memory `exists` map, which is always empty on a fresh process, so a survived interface never got interfaceDown before interfaceUp tried `ip link add` against a name the kernel already had — failing forever and never populating m.ifaces, so traffic accounting silently stopped and the inbound could never be removed. Gate on isInterfaceUp instead, which checks real kernel state rather than this process's own bookkeeping. - An inbound deleted from the database entirely while the panel was down has no entry in `desired` ever again, so it never reaches the per-id cleanup loop in Reconcile (which only walks m.ifaces). Add a one-time sweepOrphansLocked scan of configDir, mirroring mtproto.Manager.sweepOrphansLocked, that tears down and removes any leftover interface/config not in the current desired set. Found by the automated review on MHSanaei/3x-ui#6105 (Finding 1). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * i18n(amneziawg): backfill IPv6/obfuscation/port-forwarding keys in 11 locales Only en-US/ru-RU ever got these 9 keys as each AmneziaWG feature landed (the regenerate-obfuscation button, then Phase 2a's IPv6 fields, then Phase 2b's per-client ForwardedPorts) — the other 11 locale files were never backfilled, so i18next has been silently falling back to English for all of them since Phase 1. Cosmetic-only (never broke anything), but now closed for every shipped locale. * fix(amneziawg): resolve 7 Medium findings from the automated PR review Each is independently reproducible; fixed together since one review pass found all of them. - manager.go: the shared "ip rule add fwmark" policy route had no existence check, so it duplicated in "ip rule show" on every interface bounce (which hostRulesFingerprint forces on any client add/remove/ re-IP). Now checked via "ip rule list | grep -q ..." first. (Finding 2) - params.go: ExternalInterface, IPv6ExternalInterface, and subnetIp/ subnetCidr are interpolated unescaped into a shell-executed PostUp/ PostDown line, but only obfuscation and the IPv6 subnet were validated before save. Added ValidateInterfaceName (a strict charset+length pattern) and ValidateSubnetIPv4 (netip.ParsePrefix), wired into normalizeAmneziaWGSettings. (Finding 3) - amneziawg_job.go: IsAwgInstalled() existed but nothing ever called it, so a host without awg/awg-quick (the Docker image, RHEL, Arch, a failed install.sh PPA step) logged a reconcile failure every 10s forever. Now checked once an inbound actually needs it, warning once instead of spamming. (Finding 4) - client_inbound_apply.go: the WireGuard/AmneziaWG credential carry-forward (added so a metadata-only client edit doesn't rotate keys) never covered ForwardedPorts, so a partial edit -- an API call or Telegram-bot toggle that omits the field -- silently wiped a client's port-forwarding spec. Carried forward and written back the same way the key fields already are. (Finding 5) - manager.go: hostRulesFingerprint keyed each peer on its IPv4 address only, and structuralFingerprint omitted IPv6Enabled/IPv6ExternalInterface entirely, so an IPv6-only change could pick the syncconf reload path (which never re-runs PostUp, leaving a stale NDP-proxy entry) or be a complete no-op. Both fingerprints now cover the IPv6 fields. (Finding 6) - port_conflict.go: the AmneziaWG egress bridge (injectAmneziawgEgress) binds 127.0.0.1:63100+id with no collision check anywhere, since it isn't a database row the ordinary port-conflict query can see -- same blind spot the reserved Xray API port already has its own check for. Added the equivalent check for the AmneziaWG bridge port. (Finding 7) - install.sh: install_amneziawg ran unconditionally for every install/ update, building a DKMS kernel module and enabling host-wide IPv4/IPv6 forwarding whether or not the feature is ever used. Gated behind a new should_install_amneziawg (XUI_INSTALL_AMNEZIAWG=true/false, or an interactive y/N prompt defaulting to no). Also replaced the deprecated apt-key adv with a dedicated keyring + signed-by= on the Debian branch, and guarded its sources.list appends against duplication on a retried install. (Finding 8) Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): make the Xray TPROXY bridge a per-inbound opt-in Addresses Finding 10 from the automated PR review: an always-on TPROXY bridge makes every AmneziaWG tunnel hard-depend on Xray being up (all traffic, including DNS, drops whenever Xray restarts), and forces a full awg-quick down+up bounce on any client add/remove/re-IP, permanently losing the syncconf fast path. Adds ServerSettings.RouteThroughXray (off by default): - defaultPostUpDown only emits the TPROXY/policy-route rules when it's on; a plain AmneziaWG tunnel now has zero Xray dependency out of the box. - structuralFingerprint covers it (toggling it changes whether PostUp/ PostDown contain any TPROXY rules at all -- structural, not a per-peer host-rule). hostRulesFingerprint's IPv4 tracking is now itself conditional on RouteThroughXray (and IPv6 tracking on IPv6Enabled), so an instance that never uses either keeps the syncconf fast path for a plain peer re-IP. - injectAmneziawgEgress only creates a bridge for inbounds that opted in; checkAmneziawgEgressConflict (the Finding-7 fix) now parses each candidate through InstanceFromInbound so a non-routed inbound's port is correctly never treated as reserved. - New inbound-level Switch in the AmneziaWG form; the actual outbound decision is still made entirely through the panel's stock Routing page, same as before -- only whether the bridge exists at all is now a choice. Translation keys added to all 13 locales in the same commit this time, not backfilled later (see Finding 9's lesson). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): resolve 4 Low findings from the automated PR review - manager.go: serverAddress assumed subnetIp always ends in ".0"; a base like "10.8.1.5" was used verbatim as the server's own address, eventually colliding with peer allocation (which starts at .2 upward). Now derives the first host of the actual subnetIp/subnetCidr network via netip, matching serverAddressV6's own approach. A /32 base (no host bits at all) is still used as-is. (Finding 12, partial -- the /16 pool-widening half of this finding only exists on the upstream-pr/amneziawg branch's merged client_wireguard.go, not here; handled separately on that branch.) - manager.go: ensureLocked carried the previous per-peer traffic counters (`last`) forward even through a full restart, but awg-quick down+up resets the kernel's own counters to zero -- the next CollectTraffic computed a large negative delta (clamped to 0), silently discarding real traffic. Extracted the decision into nextTrafficBaseline: only a reload (syncconf) preserves the baseline. (Finding 13) - portfwd.go: exported ForwardedPortsInclude; inbound_amneziawg.go's new checkForwardedPortsConflict uses it to reject, at save time, a client's forwardedPorts that would DNAT the panel's own port or another enabled inbound's port to the tunnel client -- portForwardLines has no destination restriction, so this collision was previously silent. Wired into both the single-client update path and the add-client path (client_inbound_apply.go), plus normalizeAmneziaWGSettings for the whole-inbound save path. (Finding 14) - inbound.go: InboundOption.AwgServer sent the whole ServerSettings struct including PrivateKey to GetInboundOptions callers -- a shared, admin-wide dropdown-filling endpoint the frontend's own AwgServerOptionSchema never reads that field from. Redacted it before assigning. (Finding 11) Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): don't widen the peer address pool past AmneziaWG's own subnet Completes Finding 12 from the automated PR review (the serverAddress half of this finding was already fixed on main and cherry-picked here). This half is specific to this branch: allocateWireguardAddress's /16 pool-widening fallback is an independent addition from upstream's own main that this branch inherited during the cherry-pick rebase -- it doesn't exist on the fork's own main at all, so this fix can't be cherry-picked the normal way and is committed directly here. Widening is safe for WireGuard's own Xray-native inbound (AllowedIPs isn't tied to a strict kernel interface subnet), but AmneziaWG's kernel interface Address is exactly the configured subnet -- an address allocated from the containing /16 once the /24 fills up would be silently unroutable. allocateWireguardAddress now takes an explicit allowWidening bool: WireGuard's own caller passes true (unchanged behavior), AmneziaWG's passes false (fails loudly on exhaustion instead). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * docs(docker): note that AmneziaWG doesn't work in this image Investigated: the image is Alpine-based, and AmneziaWG's own packaging (DKMS module + amneziawg-tools) doesn't target Alpine/musl at all -- unlike the Debian/Ubuntu/Fedora/Arch paths install.sh already handles, there's no package to apk add even with full host network/capabilities. The panel already degrades gracefully (IsAwgInstalled() logs one warning instead of retrying forever), so no code change is needed -- just made the reason explicit at the point where a user would reach for cap_add/ network_mode to try to work around it. * fix(sub): include amneziawg inbounds in subscription links getInboundsBySubId's SQL protocol allowlist never had 'amneziawg' added, so every AmneziaWG client was silently excluded from all three subscription formats (plain/individual links, JSON, Clash) and from the Telegram bot's QR/individual-link buttons, which fetch through the same path. genAmneziaWGLink itself was already fully implemented and already wired into GetLink's dispatch switch -- it just never got a chance to run. Same bug shape as the earlier TRACKED_PROTOCOLS frontend gap: a hardcoded protocol list one entry short. Found while investigating whether the Telegram bot needed AmneziaWG- specific client-management code -- it doesn't (the bot itself is fully protocol-agnostic), but this is the actual root cause of "can't share an AmneziaWG client's config via the bot." Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(inbound): enforce node-eligibility server-side, not just in the UI Investigated multi-node interaction with AmneziaWG: the master's own reconcile (DesiredAmneziaWGInstances) and Xray config generation (injectAmneziawgEgress, the GenXrayInboundConfig protocol skip) all correctly filter on NodeID IS NULL, so a node-assigned AmneziaWG (or MTProto) inbound would never be managed by the master. But nothing stopped one from being created that way: NODE_ELIGIBLE_PROTOCOLS (frontend/src/pages/inbounds/form/InboundFormModal.tsx) only hides the node picker client-side -- a direct API call could set nodeId on an AmneziaWG inbound, which every node then reconciles as an ordinary local inbound (nodes run the identical binary, full cron suite included), leaving it running unmanaged and untracked by the master's own AmneziaWG bookkeeping. Added isNodeEligibleProtocol (inbound_protocol.go), mirroring the frontend's allowlist, and enforced it in both AddInbound (the actually exploitable path -- nodeId comes straight from the request) and UpdateInbound (defense in depth; NodeID is already restored from the stored row there before this check, so it mainly guards against a protocol change on an existing node-hosted inbound). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): allow TPROXY-marked traffic through a default-deny INPUT chain TPROXY never rewrites a packet's own destination address, only the routing decision. A default-deny firewall whose INPUT chain sanity-checks "is this destination actually local" (UFW's ufw-not-local, via addrtype --dst-type LOCAL, is a concrete example) silently drops the redirected packet before Xray's socket ever sees it -- RouteThroughXray looked fully configured (TPROXY rule present and counting, Xray listening with IP_TRANSPARENT set) yet every peer's traffic vanished with no trace on either side. Adds an idempotent, never-torn-down "iptables -I INPUT 1 -m mark --mark <fwmark> -j ACCEPT" alongside the existing shared policy route, so this works regardless of which firewall manager owns the rest of the INPUT chain. * fix(frontend): give AmneziaWG the same UDP tag and its own tag color The Inbounds list only special-cased isWireguard/isHysteria for the "UDP" network badge, so an AmneziaWG row showed just the bare protocol tag with no transport badge next to it. Added the missing isAmneziawg flag (mirrors isWireguard exactly) and wired it into the same branch. Client-row protocol-color maps in ClientsPage/HostList had no amneziawg entry, silently falling back to grey -- ClientInfoModal already had amneziawg: 'yellow' from earlier work, these two just never got it. * feat(logs): show which AmneziaWG client an access-log line belongs to The dokodemo-door TPROXY bridge every AmneziaWG peer's traffic is routed through has no per-user identity, so Xray's own access log never carries an "email:" token for these lines -- the Access Logs modal showed a blank Email column for every in-*-udp row, even though every other protocol's rows show the client normally. The peer's decapsulated tunnel IP does survive as the log's "from" address, and that IP deterministically maps to exactly one configured peer. Builds a "<inbound tag>|<ip>" -> email index from the same AmneziaWG inbounds already parsed elsewhere (amneziawg.InstanceFromInbound), and fills in Email from it whenever the raw log line didn't have one. * fix(amneziawg): enable sniffing on the TPROXY bridge Domain-based Routing rules could never match RouteThroughXray traffic: an AmneziaWG peer resolves DNS itself, through the tunnel, before ever sending a packet, so the decapsulated traffic TPROXY hands to the bridge is already a bare destination IP with no domain name attached at the network layer. Every other inbound recovers this via sniffing (confirmed working for the stock wireguard inbound, which does have it configured); the bridge never got a sniffing block at all, so only tag/IP/network-based rules could ever match it -- any domain rule above it in the list was silently unreachable. * docs: add an AmneziaWG config page and list it as a supported protocol Closes the PR checklist gap: the feature shipped with zero mention on the docs site. Mirrors reality.mdx's structure (key settings, setup steps, config excerpt) and notes the Docker/multi-node/Telegram-bot caveats the PR itself is honest about not having confirmed. * fix: address the fresh review round on PR #6105 (8 findings) 1. hostRulesFingerprint didn't account for ForwardedPorts when RouteThroughXray was off, so re-IPing a peer with port-forwarding configured left stale DNAT rules pointing at an address the next peer could be handed. 2. Server/client config values (keys, email, I1) were never validated for control characters before being written into the generated .conf; a newline could smuggle a PostUp hook into awg-quick's parser. Added ValidateConfigValue at save time and a sanitizeConfigValue backstop at render time. 3. checkForwardedPortsConflict didn't scope to node_id IS NULL, so a port used only on a different node produced a false collision; also hoisted the panel-port/inbounds lookup out of the per-client loop (portConflictContext) so N clients cost one query, not N. 4. PostDown commands were ";"-joined and abort on the first failure; appendOrTrue makes teardown best-effort so an external firewall flush can't leave DNAT rules to accumulate across bounces. 5. The "ip rule list | grep -q" existence check could SIGPIPE under pipefail and re-add a duplicate rule; switched to grep -c >/dev/null. 6. Ported the vpn:// share-link format (base64url of the plain .conf text, matching the real AmneziaVPN app) onto this branch -- it had only ever landed on our own fork's main, so this PR branch was still on the old amneziawg://+query-params scheme our own docs no longer described. Also corrected the docs' install.sh claim (opt-in/ interactive, not automatic) and stale pre-opt-in comments in route_egress.go. 7. install.sh: Arch's ndppd install used pacman -Syu (full system upgrade) instead of -Sy like every other call in the script; and should_install_amneziawg re-prompted on every `x-ui update` even when awg was already installed. 8. CollectTraffic could clobber a concurrent restart's freshly-reset (empty) traffic baseline with stale pre-restart counters, since getPeerStats runs lock-free; now checks pointer identity before writing back. sweepOrphansLocked permanently disabled itself on a transient os.ReadDir failure instead of allowing a retry. go build/vet/test and frontend typecheck/lint/build/vitest all pass. * fix(install.sh): check the live sysctl value, not sysctl.conf text Reviewer feedback (cherts, PR #6105): grepping /etc/sysctl.conf for the setting name is unreliable -- many distros split sysctl config across /etc/sysctl.d/*.conf, and /etc/sysctl.conf can be a symlink into that directory, so the check can miss an already-active setting (harmless duplicate append) or match a disabled/commented line (forwarding silently stays off). Query the live value via `sysctl -n` instead, which is accurate regardless of which file set it. Applied the same fix to both the IPv6 and IPv4 checks for consistency. * fix: update inbound_amneziawg.go to the split buildInboundForLocalRuntime Same fork-only-file blind spot as the one caught on our own main after the 3.6.0 sync: upstream split buildRuntimeInboundForAPI into buildInboundForNodePush / buildInboundForLocalRuntime (part of the node-sync client-deletion fix, |