Follow-up found in review: the wire normalizer still stripped
tryDelayMs when it equaled 0, but with the schema default now 250 a
reload rehydrates the missing field as 250 - a user who explicitly set
0 ("disabled", per the field's own placeholder) would see 250 and any
subsequent save would silently enable a delay they turned off. Keep
tryDelayMs on the wire unconditionally; it is the one happy-eyeballs
field whose presence changes xray's behavior.
Refs #5780
rawInboundToFormValues injected the stored xhttpSettings blob into the form
store without running it through XHttpStreamSettingsSchema, so the
sessionPlacement/sessionKey -> sessionIDPlacement/sessionIDKey rename from
xray-core v26.6.22 (and the v3.4.0 field defaults) never applied on the
edit path. Inbounds saved before the rename opened with blank session
fields, and the stale keys could ride back on save even though the core no
longer reads them. Parse the sub-object through the schema on load, and
lift any stale legacy keys in normalizeXhttpForWire as a backstop.
Closes#5621
* feat(xhttp): support sessionID* rename + sessionIDTable/Length (xray v26.6.22)
xray-core v26.6.22 (PR #6258) renamed the XHTTP session config keys
sessionPlacement/sessionKey to sessionIDPlacement/sessionIDKey (no fallback
kept in core) and added sessionIDTable (predefined charset name or literal
ASCII) and sessionIDLength (range, e.g. 16-32, lower bound > 0).
Panel changes:
- Schema (xhttp.ts): rename the two keys, add sessionIDTable/sessionIDLength,
and a z.preprocess that lifts legacy keys off stored configs so an upgraded
panel never silently drops a saved session setting.
- Wire normalize + share-link build/parse: rename keys, emit the two new
fields, and accept legacy sessionPlacement/sessionKey from old share links.
- Inbound + outbound XHTTP forms: rename field paths, add a sessionIDTable
autocomplete (9 predefined tables + free ASCII) and a sessionIDLength range
input shown only when a table is set, with light client validation (ASCII
table, length min > 0; xray enforces the room-size minimum server-side).
- Subscription (service.go) and Clash (clash_service.go) builders: emit the
renamed + new keys, with a legacy fallback for not-yet-resaved inbounds.
- Locales: add sessionIDTable/sessionIDLength labels + hints in all 13 files.
Two sibling v26.6.22 XHTTP commits need no panel change and are covered by the
core bump alone: #6332 (XHTTP/3 closes QUIC/UDP) and #6320 (udpHop honors the
existing dialerProxy).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* test(xhttp): add Session ID Table to inbound form-blocks snapshot
The new sessionIDTable input renders by default in the inbound XHTTP form, so
its label joins the field-structure snapshot. sessionIDLength stays conditional
(only shown when a table is set), so it does not appear here.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(xhttp): migrate legacy session keys in the running xray config
The Zod preprocess plus the subscription/Clash fallbacks only covered the
panel UI and share-link output. The config handed to the running xray-core
process is built from the raw stored streamSettings in GetXrayConfig, which
did not rewrite the renamed XHTTP session keys — so a pre-upgrade inbound (or
template outbound) stored with a non-default sessionPlacement was emitted
unchanged and dropped by xray-core v26.6.22, until the admin re-saved it.
Lift sessionPlacement/sessionKey onto sessionIDPlacement/sessionIDKey at
config-generation time, in the existing inbound stream-rewrite block (next to
the tls/reality/externalProxy handling) and across template outbounds. The
lift is idempotent and leaves unchanged configs byte-identical so the
hot-reload diff never sees a spurious change.
Also tighten validateSessionIDLength to reject an inverted range (e.g. 32-16)
in addition to the existing lower-bound > 0 check.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(xray): avoid summed-capacity allocation in mergeSubscriptionOutbounds
CodeQL go/allocation-size-overflow flagged the pre-sized make() whose
capacity was a sum of three slice lengths. Grow the slice via append on
a nil slice instead; same result, no overflow-prone capacity expression.
TLS: add verifyPeerCertByName (vcn) to inbound settings + emit in both share-link generators (frontend + Go sub) and outbound parser; the allowInsecure replacement xray removed after 2026-06-01. Add server-side curvePreferences, masterKeyLog, echSockopt (passthrough + form) at tlsSettings top-level so they survive the panel-only settings strip.
REALITY: add limitFallbackUpload/Download (afterBytes/bytesPerSec/burstBytesPerSec) with per-field tooltips, plus masterKeyLog. Verified field names/semantics against pinned xray v1.260327.1 (bytesPerSec=0 disables).
Hosts: fix verify_peer_cert_by_name column bool->string (xray expects comma-separated names) with an idempotent, history-gate-free migration (SQLite typeof blank; Postgres ALTER once); emit vcn for hosts/external proxies.
Server: add getCertHash (local cert DER SHA-256) and getRemoteCertHash (xray tls ping) endpoints + api-docs; wire pinned-cert field buttons. Drop the meaningless random-hash button.
Xray UI: metrics endpoint (listen/tag) config in Basics; import/export for routing rules and outbounds.
Fallbacks card: compact empty state, header-aligned actions, responsive labeled grid rows.
i18n: add all new keys to every locale; drop unused generateRandomPin.
* fix(sub): preserve non-default scMinPostsIntervalMs in inbound wire payload
The frontend wire normalizer unconditionally deleted scMinPostsIntervalMs
from inbound configs before persisting to the database, so JSON
subscriptions could never include it — even when the admin set a
non-default value like "50-150".
Only strip the xray-core default ("30") or empty values. The literal
"30" is a known DPI fingerprint (#5141) and must still be removed, but
custom tuning knobs must survive the round-trip so that buildXhttpExtra
and the JSON subscription generator can propagate them to clients.
Add tests for non-default preservation and empty-value stripping.
* fix(sub): use per-inbound xmux instead of global subJsonMux in JSON subscriptions
The JSON subscription generator always used the global subJsonMux panel
setting for outbound.Mux, even when the inbound carried per-inbound xmux
inside xhttpSettings. This meant XHTTP outbounds that configured their own
multiplexing via xmux still got the legacy mux.cool block injected — and
the inbound's own xmux was silently ignored.
Now getConfig() checks whether xmux is present in the inbound's
xhttpSettings. When it is, the per-inbound xmux handles multiplexing
and the legacy outbound.Mux is suppressed. When xmux is absent, the
global subJsonMux is used as before.
The mux selection is threaded through genVless, genVnext, genServer,
and genHy as an explicit parameter so each protocol handler can decide
independently.
Add tests:
- xmux present → outbound.Mux suppressed, xmux survives streamData()
- no xmux → global subJsonMux used as outbound.Mux
* feat(ui): add scMinPostsIntervalMs to inbound XHTTP form
The inbound XHTTP form was missing scMinPostsIntervalMs, making it impossible
for admins to configure this client-only tuning knob through the panel. The
field already existed in the Zod schema and outbound form, and the wire
normalizer (PR #5393) now preserves non-default values for subscription
propagation.
Add Form.Item for scMinPostsIntervalMs in the packet-up section of the
inbound XHTTP form, after scMaxEachPostBytes. Use the existing translation
key and a placeholder that shows the range format without endorsing the
DPI-fingerprinted default (30).
Update the Zod schema comment to clarify that scMinPostsIntervalMs is now
preserved on inbound for subscriptions, while uplinkChunkSize and
noGRPCHeader remain outbound-only.
Add two integration tests:
- Non-default value (50-150) preserved through formValuesToWirePayload
- Default value (30) stripped through the full pipeline
* fix(ui): show packet-up fields for auto mode in inbound XHTTP form
When mode is 'auto', the server accepts all three XHTTP modes including
packet-up. The packet-up-specific fields (scMaxBufferedPosts,
scMaxEachPostBytes, scMinPostsIntervalMs) are therefore relevant and
should be configurable.
Change the conditional from 'packet-up' only to
'packet-up || auto' so admins using the default 'auto' mode can
configure these fields.
* fix(outbound): show scMinPostsIntervalMs for auto mode, update placeholder
- Show scMinPostsIntervalMs field when mode is 'auto' in addition
to 'packet-up', since auto+TLS resolves to packet-up client-side
- Change placeholder from '30' (DPI fingerprint) to 'e.g. 50-150'
for consistency with inbound form
* fix(inbound): show scMaxEachPostBytes for all modes, gate scMaxBufferedPosts behind packet-up/auto
scMaxEachPostBytes is used by xray-core in every mode (both handlePacketUp
and handleStreamUp validate it) and must be visible regardless of mode.
scMaxBufferedPosts is only used by handlePacketUp, so it remains gated
behind the packet-up/auto conditional.
Also show scMinPostsIntervalMs for auto mode in outbound form and change
placeholder from '30' (DPI fingerprint) to 'e.g. 50-150'.
Update snapshot to reflect the new field order.
* fix(inbound): correct XHTTP field visibility per xray-core source verification
- scMaxEachPostBytes: move behind packet-up/auto gate (server only checks
it in handlePacketUp, not handleStreamUp)
- scMaxBufferedPosts: show for packet-up, stream-up, and auto (server
uses uploadQueue in both handlePacketUp and handleStreamUp)
- scStreamUpServerSecs: already correct (stream-up only)
Verified against xray-core hub.go and dialer.go source code.
---------
Co-authored-by: w3struk <w3struk@gmail.com>
Co-authored-by: MHSanaei <ho3ein.sanaei@gmail.com>
* feat: implement inbound XMUX form fields
* fix: replace any cast to satisfy eslint
* test: update xhttp form snapshot for XMUX
* fix(inbound): persist xmux on save so the XMUX form actually round-trips
The inbound wire normalizer unconditionally deleted xhttpSettings.xmux,
so the new inbound XMUX form was stripped on save and never reached the
stored config — the subscription extra blob (buildXhttpExtra) could
never see it. Gate the deletion on the enableXmux toggle, mirroring the
outbound adapter, and add regression tests for both on/off cases.
* fix(xmux): enforce xray-core's maxConnections/maxConcurrency exclusivity
xray-core's XmuxConfig rejects a config that sets both maxConnections
and maxConcurrency. The panel pre-fills maxConcurrency ('16-32') whenever
XMUX is enabled, so an explicit maxConnections would always collide and
make xray refuse the config. Mirror core's semantics in the wire
normalizer: when maxConnections is set (>0, an explicit opt-in since it
defaults to 0), drop the leftover default maxConcurrency. Applies to both
inbound and outbound xhttp.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
The panel seeded xhttp configs with scMaxEachPostBytes=1000000 and
scMinPostsIntervalMs=30 — xray-core''s own defaults — and emitted them
into every generated config and share link. The literal
scMinPostsIntervalMs=30 is a stable DPI fingerprint that Russia''s TSPU
keys on to block connections on mobile networks.
New configs no longer seed these values (empty schema/template defaults,
so xray-core applies its internal defaults). For configs already stored
with the old defaults, the link/subscription builders now drop values
equal to xray-core''s defaults instead of advertising them — covering
panel share links, the raw subscription, and the JSON subscription
without requiring every inbound to be re-saved. Non-default values the
user set deliberately are still emitted.
* fix(panel): normalize XHTTP/sockopt/Reality wire output and validate REALITY target
Strip mode-specific XHTTP fields for stream-one, reset harmful sockopt defaults
to 0, split server/client Reality fields on save, validate target host:port in
the inbound form, and expose Happy Eyeballs for the direct freedom outbound.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(panel): keep REALITY public key on the wire, guard freedom noises
The REALITY server/client wire split deleted realitySettings.settings on save, but the panel stores the REALITY public key there and every share-link / subscription generator reads it back from that path (frontend inbound-link.ts, Go subService/subJsonService/subClashService). Stripping it produced empty pbk= links, breaking client connectivity after save+reload.
Revert the reality normalization (drop normalizeRealityForWire and the key sets), restore the inbound REALITY form fields (uTLS, spiderX, publicKey, mldsa65Verify) while keeping the new validated target field, and restore the mldsa65Verify clear handler.
Also guard freedomToWire against undefined noises/finalRules (same defensive treatment as the existing fragment guard, issue #4686) which the new freedom-outbound test surfaced as a crash. Tests now assert the public key is preserved.
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: MHSanaei <ho3ein.sanaei@gmail.com>
MHSanaei