Per-client toggle (RouteThroughXray + RouteOutboundTag) that TPROXYs a
peer's traffic into Xray instead of NAT'ing it straight out the host's
network interface, so it can egress through any configured Xray
outbound (or balancer) — a VLESS/proxy chain, WARP, etc.
Discovered mid-design that internal/mtproto already solved the "let a
native sidecar's traffic egress through Xray" problem once, via
routeThroughXray/routeXrayPort/outboundTag + injectMtprotoEgress: a
loopback bridge inbound plus a routing rule. AmneziaWG can't reuse it
directly — mtg is a userspace process that dials *out* through a local
SOCKS proxy, while AmneziaWG is a kernel tunnel interface with no
process of its own to redirect. The Xray-side shape carries over
almost exactly, the kernel-side plumbing is new:
- internal/amneziawg/route_egress.go: EgressPort/EgressTag/EgressFwmark/
EgressTable are one shared constant set, not one bridge per peer.
Every routed peer, across every AmneziaWG instance, TPROXYs into the
*same* loopback dokodemo-door bridge; the per-peer distinction happens
downstream, in Xray's own router, matched against each peer's
TPROXY-preserved source IP (Xray's field-rule `source` matcher — a
capability the router already had). This avoids two independent
reconcile loops (the AWG manager and the Xray-config generator) ever
having to agree on a dynamically-picked port for each peer.
- manager.go's defaultPostUpDown emits a per-peer mangle-table TPROXY
rule (matched by tunnel source IP) for each opted-in peer, plus the
fwmark->table->local-everywhere policy route TPROXY needs to deliver
those packets to the bridge. That policy route is system-wide, not
interface-specific, so — like the existing IPv6-forwarding sysctl —
it's added idempotently and never torn down in PostDown; a second
AmneziaWG instance with its own routed peers must find it already in
place, not race to remove what the first still needs.
- The existing portForwardFingerprint became hostRulesFingerprint,
covering both ForwardedPorts and RouteThroughXray/RouteOutboundTag:
both only ever take effect through PostUp/PostDown, which `awg
syncconf` never re-runs, so either one changing must force the same
full interface bounce.
- internal/web/service/xray.go's new injectAmneziawgEgress mirrors
injectMtprotoEgress/injectPanelEgress's safety rules, adapted for one
bridge serving many peers: an invalid or missing outbound target
skips only that one peer's rule (not the whole bridge, since other
peers may still need it), while the bridge itself is skipped
entirely when nothing needs it or its tag is already taken by a real
inbound.
Frontend: a Switch + conditional outbound Select on the client form
(showAmneziawg only), mirroring mtproto's own routeThroughXray UI and
reusing its useOutboundTags hook. install.sh now modprobes the
mainline TPROXY modules (xt_TPROXY, nf_tproxy_ipv4/ipv6) alongside the
existing AmneziaWG setup — ordinary upstream kernel modules, no
DKMS/PPA needed unlike the AmneziaWG module itself.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Admins can now set a per-client ForwardedPorts string (e.g. "80, 443,
8000-8100") that gets DNAT'd + FORWARD'd to that peer's tunnel address
via iptables rules in PostUp/PostDown, ported and simplified from
coinman-dev/3ax-ui's shared/portfwd.
Two decisions worth flagging for future readers:
- The iptables --comment tag on each rule is awg-fwd-<fnv32a(email)>,
not the raw client email. Email is admin/API-supplied free text that
ends up embedded in a shell-executed PostUp/PostDown line; a hash
can never carry a shell metacharacter through where raw
interpolation could.
- The reconcile manager gained a third fingerprint (portFwdFP, next to
the existing structural/peers ones). `awg syncconf` only touches the
WireGuard peer table — it never re-applies PostUp/PostDown iptables
rules — so a port-forward-only change has to force a full
awg-quick down+up bounce, same as a structural change, rather than
the lighter sync a plain peer add/remove can use.
Also fixes a real pre-existing bug found while wiring up IPv6 client
allocation in the previous commit's spirit: allocateWireguardAddress
always suffixed "/32" regardless of address family, which produced
invalid host bits for IPv6 (needs "/128").
ForwardedPorts flows through model.Client -> model.ClientRecord
(gorm column wg_forwarded_ports, auto-migrated) -> ToRecord/ToClient/
MergeClientRecord, mirroring the awgServer field's earlier lesson
that new fields need checking against a second, hand-maintained
persistence-layer struct.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds native dual-stack IPv6 to AmneziaWG inbounds, ported from
coinman-dev/3ax-ui's approach:
- ServerSettings gets ipv6Enabled/ipv6Subnet/ipv6ExternalInterface;
Instance carries the server's own IPv6 address (first host of the
subnet) alongside its IPv4 one.
- defaultAmneziaWGClients allocates an IPv6 host address per client
(second AllowedIPs entry) when the server has IPv6 enabled, reusing
allocateWireguardAddress — which needed a real fix along the way: it
always suffixed "/32" regardless of address family, which is wrong
for an IPv6 host address (needs /128). Now family-aware.
- generateServerConfig's PostUp/PostDown gains IPv6 forward-accept
rules, proxy_ndp sysctl, and one `ip -6 neigh add/del proxy` entry per
enabled peer with an IPv6 address — the lightweight per-client
method, not the ndppd-daemon whole-subnet method (not worth the
config-file-management complexity at this scale; ndppd itself is
still installed by install.sh in case that changes later).
- ValidateIPv6Subnet rejects a malformed subnet before save.
- Frontend: ipv6Enabled/ipv6Subnet/ipv6ExternalInterface fields on the
AmneziaWG inbound form, EN+RU translations, openapi.json/generated/*
regenerated (the latter via `go run ./tools/openapigen`, pure Go).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Wires the amneziawg protocol through the panel UI the same way every
other protocol is registered: a Zod settings schema (nested
{server, clients}, matching the Go JSON exactly), the protocol enum,
the inbound-form's per-protocol fields component and its
tab-visibility allowlist, the default-settings factory, the client
schema dispatcher, and the sniffing-capability exclusion (no Xray
inbound exists for amneziawg, same as mtproto).
Client key/allowedIPs fields are reused rather than duplicated: since
AmneziaWG clients are wire-identical to WireGuard clients (same
model.Client fields), ClientFormModal renders one shared field block
for both, switching only the visible label by which protocol is
active. The private-key input also gets a live public-key sync via a
new useEffect, because unlike WireGuard's Xray-native inbound (which
re-derives its public key at runtime and never stores one),
AmneziaWG's server.publicKey is a real persisted field the Go backend
reads directly — free-typing a new private key without this would
silently save a mismatched keypair.
Adds a downloadable per-client .conf (amneziawgConfig.ts, mirroring
wireguardConfig.ts) with the obfuscation lines, and an
InboundOption.AwgServer field on the Go side so the config builder
gets the full server block in one round trip.
Along the way, running tools/openapigen surfaced a real bug: it
doesn't flatten anonymously-embedded Go structs the way encoding/json
does, so ServerSettings embedding Obfuscation20 produced a Zod schema
with a nested `obfuscation20` key that never matches the real wire
JSON. Fixed by un-embedding (flat fields + an accessor method) and
registering internal/amneziawg in the generator's own package list,
which had been silently emitting a dangling schema reference.
English and Russian translations are complete; the other 10 locale
files still fall back to English for the new keys.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
AmneziaWG (WireGuard plus DPI-resistant obfuscation) needs no Docker
here — it runs as a genuine kernel interface via awg-quick/awg, managed
the same way internal/mtproto manages mtg: one Inbound row is one
desired Instance, and a Manager reconciles running interfaces toward
the database every 10s (internal/web/job/amneziawg_job.go) plus
immediately after a client edit (applyLocalAmneziaWG).
Clients reuse model.Client verbatim (the same PrivateKey/PublicKey/
PreSharedKey/AllowedIPs fields WireGuard already uses), so bulk
operations, the QR/share-link modal and subscriptions come from the
shared inbound infrastructure instead of a parallel implementation.
internal/amneziawg owns the obfuscation param generator/validator
(ported from coinman-dev/3ax-ui, upgraded to AmneziaWG 2.0's S3/S4
padding and I1 signature packet) and the exec wrapper around
awg-quick/awg, with fingerprint-based reconcile (noop / reload-via-
syncconf / full restart) mirroring mtproto.Manager so a same-protocol
edit doesn't force an unnecessary interface bounce that would drop
every peer's connection.
Frontend and install.sh's DKMS/awg-tools setup are tracked separately;
this is backend-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>